Ep/Nn/High Temperature/Heat Resistance/Fire Resistant/Oil Resistant/Tear Resistant Corrugated Sidewall Conveyor Belt with Natural Rubber and Cleat

Introduction of anti-tear EP conveyor belt

1. Model: EP80-EP630

2. Width: 300MM-2300MM

3. Thickness: 4-50mm

4. Tensile strength: 6MPA-25MPA

Standard

GB/T7984-2001, GB/T10822-2003, DIN22102, AS1332, JISK6322, etc.

feature

·Excellent heat-resistant and wear-resistant covering compound

·Perfectly prevent the conveyor belt from cracking and hardening due to heat

·After special heat treatment and impregnation, the fabric can reduce the shrinkage of the cas body caused by heat aging

· Rubber cover and carcass that can withstand high temperatures

Anti-tear EP conveyor belt refers to a conveyor belt with an anti-tear cloth layer on the inside and an anti-tear net on the outside. This type of conveyor belt is generally used in a transportation environment with high requirements for pulling force and transportation, and transportation is relatively far away.

The basic structure of the anti-tear EP conveyor belt is also composed of most of the belt body, which includes the upper cover rubber, the lower cover rubber and the internal anti-tear layer. Of course there are also special tear-proof belts. For example, anti-tear type large inclination side rib conveyor belt, anti-tear type pattern conveyor belt, etc., but this type of conveyor belt is generally rare and belongs to special shaped conveyor belts.

The external tear-proof net is a steel net with very strong tension, and the tear-proof belt with steel net added has increased lateral rigidity. With each layer added, the pulling force increases by one level. The pulling force is gradually increased according to different usage conditions.

How to determine the tear resistance you need?

1 The hourly transportation volume of the materials you need to transport, the greater the transportation volume, the greater the need. If you don’t understand this, you can tell our technical staff and we will help you to calculate it.

2Secondly, it depends on the distance of your transportation. Generally, the transportation distance is relatively long, so it is necessary to add a tear-proof net. Because of the long transportation distance, the higher the requirement for the safety factor of tearing, the tear-proof net must be added.

Anti-tear conveyor belts also need to consider the problem of punching. This type is generally bucket elevator wire rope conveyor belts, which are used on bucket elevators. Such conveyor belts need you to provide us with drawings for punching.