During transportation and storage, the mining conveyor belt should be kept clean, avoid direct sunlight, rain and snow, prevent contact with substances that affect the quality of rubber such as acids, alkalis, oils, and organic solvents, and be 1 meter away from the heating device. During storage, the temperature in the warehouse should be kept between -15°C and +40°C, and the relative humidity should be kept between 50% and 80%.
Conveyor belts must be placed in rolls during storage and must not be folded. During storage, the conveyor belts should be turned once every season.
The running speed of the conveyor belt should not be greater than 5.0 m/s, and the low speed should be used as far as possible when transporting large, abrasive materials and using a fixed plow-type unloading device. When the speed exceeds the specified speed, the service life of the tape will be affected.
The relationship between the diameter of the transmission roller of the conveyor and the cloth layer of the conveyor belt, the matching of the reversing roller of the transmission roller and the requirements for the groove angle of the idler should be selected reasonably according to the design requirements of the conveyor.
In order to reduce the impact and abrasion of the material on the belt, the feeding direction of the mining conveyor belt should follow the running direction of the belt; the drop of the material falling on the belt should be minimized; the feeding port should avoid directly above the roller or roller; The receiving section should shorten the distance between idlers and take buffer measures. In order to prevent the tape from being scratched, the contact parts of the scraper cleaning device and the unloading device of the stopper device and the tape should be made of rubber plates with appropriate hardness. Do not use tape heads with cloth layers.